About : 2500 Chevrolet G20 Van Vandura 1989 4.3L V6 (automatic transmission problem)

Reply Subscribe

Thread Tools

Search this Thread

August 14th, 2011, 5:06 PM

lcfake

CF Beginner

Thread Starter

Join Date: Aug 2011

Posts: 1

Likes: 0

Received 0 Likes on 0 Posts

About : 2500 Chevrolet G20 Van Vandura 1989 4.3L V6 (automatic transmission problem)

<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w:HyphenationZone>21</w:HyphenationZone> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>FR</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w:EnableOpenTypeKerning/> <w

ontFlipMirrorIndents/> <w:OverrideTableStyleHps/> </w:Compatibility> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]--> About : 2500 Chevrolet G20 Van Vandura 1989 4.3L V6 (automatic transmission problem)
Hi ! I got some troubles with my new chevy that I don’t manage to understand, I’d really appreciate if you could “bring me you lights” !
I have been owning it for one week, I have a cooling liquid leak, when I make the level, the liquid flows under the engine (engine hot), but I do not know where. I have changed a part of the radiator at the top right of it : A screw on a hose which was connected rather thin (10 mm in diameter). I have not made the level again, there is no more cooling liquid flowing under the engine, and if I watch the thermostat, the engine heats and cools down properly.
This leak has stained the engine, and since the engine is hot when I ride, it’s hard to gear to the third speed, the engine is over-revving on the second one (I mean the engine revs up I hope you understand) . I have to decerelate in order to gear up to the third speed, but it works more or less.
I don't know how to deal with an automatic, I'm French and I only drive manual transmissions.
Is that possible that an oily belt (driving belt I think) would slip and prevents from gearing up ? Because the engine also slips in reverse (R).
I hope I was clear enough, I am French and my English is not perfect, particularly with specialized vocabulary ! Do not hesitate to ask me for some precisions if not !
Regards, Aurelien.