Emission failed
December 5th, 2011, 5:12 PM
#1
New User
Awaiting E-mail Confirmation
Awaiting E-mail Confirmation
Thread Starter
Join Date: Dec 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Emission failed
I have 1994 chevrolet s-10 Blazer.
Emission was failed for HC too high.
I replace EGR valve, and ECM with PROM.
Cause EGR didn't get signal from ECM, but still don't get.
and I replaced catalytic converter 2yrs ago.
NO limit 938 my car reading 2963
HC limit 141 my car reading 15
CO limit 1.14 my car reading 0
Do you know anybody?.....
Emission was failed for HC too high.
I replace EGR valve, and ECM with PROM.
Cause EGR didn't get signal from ECM, but still don't get.
and I replaced catalytic converter 2yrs ago.
NO limit 938 my car reading 2963
HC limit 141 my car reading 15
CO limit 1.14 my car reading 0
Do you know anybody?.....
December 6th, 2011, 5:18 PM
#2
Welcome to the forum.
I don't know what you're asking. The EGR system is inoperative on yours. This results in higher combustion temperatures and excess oxygen both of which contribute to the formation of NOx gases. Fix the EGR system and your NOx emission should come down.
I don't know what you're asking. The EGR system is inoperative on yours. This results in higher combustion temperatures and excess oxygen both of which contribute to the formation of NOx gases. Fix the EGR system and your NOx emission should come down.
Thread
Thread Starter
Forum
Replies
Last Post
